Water and raw materials mix together until a sand-like consistency is reached. Recipes vary slightly however feldspar, clay, silica sand and other materials are included in the mixture.

In this next step, a 10 meters spray dryer removes the excess moisture from the mixture until the perfect consistency (Usually 0.5mm to 2mm) is reached before the mixture is moved into a press.

Now, the porcelain mixture is pressed to form the tile. Each size and shape of available porcelain tiles use a special punch to create the body of the tile, called Greenware.

Greenware is the term used for tiles that have not been glazed or fired. Prior to that step, the raw materials are put into a 320 meters dryer to remove moisture, and water absorption rate drop from 7% to 0.5%, readying the tiles for the next step.

After the tiles have dried, the next step is to add the pattern and colors using a state-of-the-art inkjet printer(HD printer). After the pattern is applied, the glaze is applied to protect the tiles.

After the tiles have dried, the next step is to add the pattern and colors using a state-of-the-art inkjet printer. After the pattern is applied, the glaze is applied to protect the tiles.

All the Product will be under the inspection. The Qualify tiles will enter the automatic packaging process,through the automatic packaging equipment can minimize the damage caused by manual packaging, improve packaging efficiency.